|
- IP address:
Customize the controller’s IP address, subnet mask, and gateway. 3
levels of password protection available. Set the IP address
for access from a single computer, network or the Internet.
- Processor: 29.4
MHz imbedded processor.
- Software:
Each
controller includes a complete software program. Because it is
accessed as a web page from a computer, there is no software to
install and it is compatible with all operating systems that can
access the Internet.- Web Server:
Each
controller comes with its own web server. The software is accessed
through a web browser, such as Internet Explorer.- Network Connection:
10 Base-T Ethernet
- Flash Memory:
Non-volatile program memory retains program and software
indefinitely even during complete power loss.- Standard Power Supply:
AC Adapter: 750 MA, 18 VA, 24 Volts. Contact us if higher
power requirements are necessary.- Max Power
Output per station:
800 MA, 19.2 VA, 24 volts
- Number of Stations run at same time:
Standard valves require about 150 MA to
operate. The standard power supply can operate 3 valves at the
same time. The upgraded power supply can operate 10 valves at the
same time.- Case:
Each controller
comes in a steel case designed for indoor use only. Special
weather resistant enclosures are required for outdoor use.- Dimensions:
Series
1000 8.5" x 4" x 2". Series 2000 10.5" x 7" x2". Series
2000S 10.5"
x 7" x 2".
- Sensor Inputs:
8
sensor input terminals per controller. Note: Series 2000 and
Series 3000 only.
- Serial Port:
Accept
and send serial commands to interface with other
automation/security systems. Customize the Baud rate. Series 3000
only.- X10 Commands:
Send
and receive X10 commands over the existing electrical wires in
your home using the powerlinc II plug-in adapter. Series 2000S
only.
|
